Image: ROICO Solutions ApSBobby
Image: Legend RobotLatex Paint Spraying Robot
Self-driving robot that sprays latex paint onto interior walls and ceilings while it moves
- 3
- Deployments
- 1
- Companies that ran it
How it works on your site
It drives itself through interior rooms and sprays latex paint onto walls and ceilings from an arm on a lifting mast, spraying while it moves. Before it starts, the space is scanned and the spray path is set, and the tank needs paint and the battery a charge. Your crew refills paint and moves the robots between work areas, one operator running up to three. Pick the taller model for high walls and lobbies.
Painting
The robot drives itself through the room on an omnidirectional base and sprays latex paint with high-pressure airless spray from an arm on a lifting mast, covering walls, ceilings, corners and beams. It sprays while it moves or from fixed points, and an operator refills paint and moves it between work areas.
Field outcomes
Who has run it
3 deployments · 1 company · 3 countries
Will it work on your site
- Price
- Price on request
- Surface
- Concrete walls, drywall, plastered walls and other standard interior wall surfaces, plus ceilings, corners and beams.
- Site preparation
- The space is scanned in 3D and the spray path tuned before spraying; the maker's or agent's specialists help with jobsite setup.
- Speed
- Vendor: 230 square metres an hour and 1,200 to 1,500 a day (3.3 m model); 380 an hour and 2,400 to 3,000 a day (6.2 m model). Ottawa site: 221 an hour.
- What it prints
- Latex paint, water-based or oil-based, by high-pressure airless spray at 15 MPa recommended (25 MPa maximum). Spray width 800 mm at a fixed point, continuous when moving.
- Navigation
- Multi-sensor fusion for real-time positioning and navigation, with LiDAR obstacle avoidance. Positioning accuracy plus or minus 30 mm.
- Autonomy
- Sprays on its own once set up. The operator refills paint and moves the robot between work areas.
Show all 14
- Safety design
- Active LiDAR obstacle avoidance and passive rubber crash strips.
- Control interface
- Tablet app with one-touch control and built-in standard spraying programs. No programming needed.
- Environment
- Building interiors at 5 to 40 degrees C and up to 85% relative humidity. Infrared sensors let it work in the dark. Climbs 10 degree slopes and crosses 30 mm obstacles.
- Power
- Two swappable 48 V, 105 Ah batteries: 8 h plus 8 h on the 3.3 m model, 12 h on the 6.2 m model. Charging takes up to 3 hours.
- Weight
- 3.3 m model: 590 kg, 780 x 780 x 1750 mm, fits 840 mm openings. 6.2 m model: 1000 kg, 1450 x 780 x 1750 mm, needs 900 mm, with telescopic outriggers.
- Fleet management
- One operator supervises up to three robots.
- Training
- Ordinary workers run it after basic training. Remote commissioning after delivery; free on-site training through the agent in Eastern Canada.
- Other capabilities
- Self-cleaning: one-click pipe flushing after use. Filters and wear parts swap quickly.
Want more information?
Other robots for interior finishes
Image: ROICO Solutions ApSBobbyROICOLightweight collaborative wall and ceiling painter for standard-height interiors23 deployments · 1 country
Image: OkiboOkibo EG7OkiboBattery-powered finishing and painting arm; walls, ceilings, and sanding from one unit10 deployments · 4 countries
Image: Les CompanionsPACOLes CompanionsRobot arm on a lifting base that sprays water-based interior paint while a painter supervises5 deployments · 2 countries
Image: WEIBUILDPNP-3000iCWEIBUILDWall and ceiling spray coater for putty, primer, and paint application1 deployment · 1 country
Image: KobotsKOBOTSKOBOTSFamily of 4 sizes23 deployments
Image: ConBoticsMalerRoboter (Painter Robot)ConBoticsLightweight modular wall sprayer; one-person transport between floors25 deployments · 3 countries
Something wrong? How corrections work